04.10.2011 Samsung Focus (i917) Unbrick, Dead boot repair supported
Resurrecting Samsung I917 is simple. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.
To resurrect Samsung I917:
- Solder JTAG cable to Samsung I917 JTAG pads;
- Make sure Samsung I917 is selected in the list of models;
- Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button. In few seconds phone enters download mode.
http://www.jtagbox.com
Posted in: RIFF JTAG
0 comments:
Post a comment on: RIFF JTAG – Samsung Focus (i917) Unbrick, Dead boot repair supported