03.10.2011 CDMA Samsung B209 Breeze Supported
Resurrecting Samsung B209 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0×2256
To resurrect Samsung B209:
- Solder JTAG cable to Samsung B209 JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure Samsung B209 is selected in the list of models;
- Click Resurrect button;
- Choose which areas to flash;
- Wait till software signals a successful operation completion;
- De-solder JTAG wires;
Posted in: RIFF JTAG
0 comments:
Post a comment on: RIFF JTAG – CDMA Samsung B209 Breeze Supported