RIFF JTAG – Samsung S7330 Unbrick, Boot repair supported

03.10.2011 Samsung S7330 Unbrick, Boot repair supported
The Samsung S7330 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect Samsung S7330:

•  Solder JTAG cable to Samsung S7330 JTAG pads;
•  Connect USB cable;
•  Make sure Samsung S7330 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘9’ key and press ‘Power ON’ button.

  

[via]

Posted in: RIFF JTAG